GAF’s Master Flow Bath & Dryer Rooftop Appliance Vent provides both a sleek and effective solution for venting damaging heat and moisture from bathroom exhaust fans, dryers, and other household appliances — through the roof. Available in four colors to complement popular shingle colors, the Master Flow Bath & Dryer Rooftop Appliance Vent passes rigorous 110 mph wind-driven rain testing in accordance with TAS-100(A)¹ and the UL 2218 Impact-Resistance Test with a Class 4 rating, helping ensure reliable operation even in severe weather conditions.

^{1 Testing conducted under controlled laboratory conditions. GAF makes no express or implied warranty about the impact performance of this product against hail. Hail damage is not covered under the limited warranty.}

Residential roofing contractors asked for more control over proper intake attic ventilation. The Edge Vent installs on the roof — during a roofing project — at the very edge of the roof with matching shingles on top. Each four-foot rigid, plastic stick provides 9 square inches of airflow per linear foot, making it easy to balance with the exhaust vents. It can be used on roofs with or without overhangs. It’s an easy way to add extra intake to existing, insufficient intake. It’s suitable for any climate and passed a 30-day ice dam test.

Designed for use with both roof and wall systems, AeroNet helps ensure proper drainage and drying behind roofing and cladding materials to protect the building envelope against moisture intrusion. It improves on existing rainscreen options with straightforward installation, uniform application from wall to roof, elimination of wood furring strips, and better compression resistance, among other benefits. Simply roll onto the wall or roof and fasten with 1-inch cap nails or 7/8-inch staples — no special tools required.

FlashCo’s X-Top Roof Vents are prefabricated exhaust vents used for non-heated exhaust ventilation. X-Top Vents are commonly used to allow air to freely flow through the vent while prohibiting water from infiltrating the structure. FlashCo X-Top Vents are designed for TPO and PVC roofing systems. The vent eliminates field fabrication, installs in minutes, and has a removable top for easy maintenance. The galvanized steel sub-base meets the minimum 8-inch height requirement typically specified on low-slope roofing systems. X-Top vents come standard with a 1/8-inch galvanized wire mesh and are available in three standard sizes: 4-inch, 6-inch, and 8-inch.

Self-adhering modified bitumen cap sheets from MuleHide go on quickly, clean and torch-free. The premium-quality polyester-reinforced membranes also meet the toughest code requirements, delivering years of waterproof, weather-tight, hassle-free performance. The sheets have an aggressive pressure-sensitive adhesive on the bottom and an APP or SBS weathering surface on top. Simply position the membrane, let it relax, peel away the release liner, press the sheet into place and roll it. No fumes or hot asphalt. No risk of fire. FASTLap granule-free end laps provide faster, stronger seams. SEALLap Ultra granule-free selvage edges have a self-adhesive compound for an immediate monolithic seam.

FlashCo’s Retrofit Roof Drains are designed to maximize flow with no obstructions in the throat and require no maintenance. The time-saving design comes ready to install with a pre-attached membrane, and no tools are required for installation. FlashCo Retrofit Drains are available for TPO, or PVC in FlashCo’s standard colors. Five common sizes are ready to ship and fit standard 2-inch to 6-inch drainpipes installed during original construction. Each unit is inspected and tested before shipping from one of our 10 convenient production facilities across the U.S.

RepairBoss by BITEC is a versatile line of high-performance roofing repair solutions engineered for lasting results in any condition. From Roof Rescue Wet/Dry, which adheres even on wet surfaces, to Emergency Sealer for flexible leak protection, All Roof Repair Mastic for UV resistance, and ElastoPav — a moisture-cured flashing system that bonds to nearly any substrate — each product delivers exceptional adhesion and durability. With easy-to-install Replacement Drain Domes, Scuppers, and traffic-resistant TrafGuard walkway pads, RepairBOSS offers a complete system of dependable repair and maintenance solutions for every roof type.

The Owens Corning DeckSeal Self-Adhered Roofing System offers a convenient, high-performance solution for low-slope (1/4:12 to 2:12 pitch) residential roofing applications such as additions, garages and porches. The two or three-ply system features a Dual Compound Formulation with excellent granule adhesion and a back coat providing aggressive adhesion to the substrate, plus a granule-free selvage edge on both side and end laps. It comes in attractive colors to complement popular shingle offerings and offers peace of mind from warranties* on both shingles and DeckSeal components from Owens Corning.
_{*See actual warranty for complete details, limitations, and requirements.}

The Elevate CLAD-GARD portfolio offers high-performance underlayment solutions for metal roofing systems. CLAD-GARD SA is a self-adhered, rubberized asphalt membrane with excellent flexibility, skid resistance and up to 239 degrees Fahrenheit heat resistance. CLAD-GARD R provides an economical, waterproof solution with a textured, walkable surface and a 60-day exposure rating. For steep slopes, CLAD-GARD MA is a mechanically attached, 100% recyclable synthetic underlayment that’s stronger and lighter than felt. All CLAD-GARD products are compatible with Elevate insulation systems and are eligible for Elevate Red Shield Warranties of up to 20 years.

IntelliWrap PR is a high-performance, self-adhered roofing underlayment designed to protect while allowing your roof assembly to breathe. It is both water- and airtight yet vapor permeable, helping to reduce trapped moisture. With a UV-stable, slip-resistant surface, it ensures safer walkability during installation. IntelliWrap PR is compatible with a wide range of roofing systems, including standing seam metal, slate, clay tile and cedar shingles, making it a versatile and durable choice for contractors and builders alike.

The combination of QB2 + BoltSeal technology makes solar installation effortless on rolled asphalt, asphalt shingle, EPDM, and TPO, no matter the roof pitch. This game-changing mount is Intertek tested, UL Recognized and Miami-Dade Accepted — all without sealant, so you can feel confident knowing water intrusion will not affect the roof. All QuickBOLT products are manufacturer warrantied for 25 years, and QuickBOLT is the ‘Preferred Mounting Provider’ covered by SolarInsure’s 30-year parts and labor warranty. With more than 4 million units installed in 10 years — with zero reported leaks — QB2 is a no-brainer for installers.

The white polyester top layer of Tarco’s LeakBarrier NR600 Ultra provides a lower-temperature working surface for the installer, while the thick layer of SBS compound self-seals around fasteners, preventing moisture penetration. The back side has an aggressive self-adhesive formulation that adheres to a variety of substrates. NR600 Ultra is an excellent choice for use under tile as well as under asphalt shingles, slate, and metal. The company says it is highly effective in critical roofing areas such as valleys, ridges, coping joints, chimneys, vents, dormers, skylights, and low-slope sections. The underlayment withstands temperatures up to 260 degrees Fahrenheit.