VENTILATION
SCROLL
DOWN
Python
CLICK HERE TO READ MORE
Python
Marco Industries
As one of North America's leading ventilation manufacturers, Marco Industries offers superior roof ventilation your way, with products tailored to fit your specific performance requirements and budget. Python is a single-layer vent made from recycled polyester that can be used under the ridge caps, ridge shingles and as a facia vent to keep attics cooler in the summer and dryer in the winter. It is ideal for all roof applications, helps reduce utility costs, and its non-wicking performance helps keep out insects, dust and moisture. Python is Miami-Dade County approved and is backed by a 50-year limited warranty. Go to Marcoindustries.com for more details or call 800-800-8590.
Intake Vent
CLICK HERE TO READ MORE
Intake Vent
CertainTeed®
CertainTeed Intake Vent is a rooftop-installed, shingle-over vent that provides continuous intake airflow at the roof's edge, making it an ideal solution for homes with little or no roof overhang. It can also be used to supplement existing soffit or undereave vents. Intake Vent features internal baffles, a drainage system, a weather filter, and louver openings sized to minimize infiltration by insects and windblown debris. Each vent offers 9 square inches of net-free area per linear foot. Combined with CertainTeed Ridge Vent, CertainTeed Intake Vent is one of the most efficient ventilation systems on the market. Visit www.certainteed.com for more information.
ACDSV Smoke Vent
CLICK HERE TO READ MORE
ACDSV Smoke Vent
BILCO
The BILCO Company’s new Type ACDSV Smoke Vent provides the highest level of protection against exterior noise on the market. With OITC-46 sound and STC-50 sound ratings, the vents guard against low-frequency outdoor sounds such as traffic and airplanes. Its ISO-140-18 sound rating when tested against rainfall is the first to reach that standard. That rating measures the impact sound insulation, roof, skylights and roof/ceiling systems incur when exposed to rainfall. The new design features mineral wool insulation and high-density sound mat material to better inhibit sound transmission. The new ACDSV is available in standard sizes. Custom sizes are also available.
Louvers and Louvered Cupolas
CLICK HERE TO READ MORE
Louvers and Louvered Cupolas
New Concept Louvers Inc.
Attic ventilation is a key part of ensuring your attic and roof avoid problems like dry rot as warm air rises and can't get out, or doesn’t have the right amount of air flow to ventilate properly. This causes your roof to expire sooner than expected and need replacing, or mold to take over in humid areas. New Concept Louvers Inc. offers maintenance-free ventilation options in many colors, and virtually any shape or size for your gable end louvers and louvered cupola needs. Both are decorative yet effective, arrive screened for pests, and ready to install. Using both of these items is a very effective way of making sure your air flow is at or above industry standards when it comes to preventing problems in your home and attic.
ShadowHawk™ Attic Exhaust or Intake Vent
CLICK HERE TO READ MORE
ShadowHawk™ Attic Exhaust or Intake Vent
Air Vent Inc.
Air Vent’s low profile ShadowHawk brings the proven technology of ridge vents to the box vent category. Featuring an external wind baffle, ShadowHawk uses the wind for increased airflow performance and weather protection. The internal weather filter and screen provides extra layers of protection from the elements. It’s been designed for use as an exhaust vent (near roof peak) or intake vent (low on the roof). It yields 72 square inches of Net Free Area. Made of galvanized steel, it’s available in mill, black, brown and weatherwood. Miami-Dade County approved, TDI and WUI (wildfire zones). Call 800-AIR-VENT or visit airvent.com.
Cool-Vent
CLICK HERE TO READ MORE
Cool-Vent
Hunter Panels
Cool-Vent is a venting composite insulation board that consists of a 4-foot by 8-foot panel of rigid polyiso, a middle layer of solid wood spacers, creating a standard 1-inch air space and a top layer of APA/TECO rated OSB or plywood. Cool-Vent features 75% lateral air movement that allows optimal cooling and ventilation throughout the 92% open air space. Cool-Vent gives you design flexibility as well — 1.5-inch and 2-inch wood spacers are also available for increased air flow when the eave ridge distance is over 20 feet. Cool-Vent is ideal under shingles, slate, tile and standing seam metal roof systems.
SmartVent
CLICK HERE TO READ MORE
SmartVent
DCI
Using SmartVent by DCI at the ridge creates a waterproof ridge vent that may be a low slope 2/12 pitched rear dormer. By cutting both sides of the ridge, it allows the heat and moist air to flow over the ridge beam and out the front steep sloped lift side of the roof. The low slope roof membrane installs completely over top of the SmartVent and gets nailed at the steeper slope lift edge. The SmartVent is available at all major roof distributors. For samples or displays call DCI at 800-622-4455 or visit www.dciproducts.com.
Roof Ventilation Product Family
CLICK HERE TO READ MORE
Roof Ventilation Product Family
TAMKO
With TAMKO’s roofing ventilation, contractors benefit from easy-to-install products while the homeowner enjoys protection for their home and enhanced curb appeal. Featuring air ventilation through accented roofing ridges, TAMKO ventilation products eliminate the need for roofing vent caps and include Roll Vent®, Rapid Ridge® and QuickVent® continuous ridge vents, Xtractor Vent® XLP Turbo (pictured) — a continuous ridge vent with external baffles — and CoolRidge®, a sectional ridge vent with external and internal baffles. TAMKO’s roof ventilation products feature convenient installation, requiring nothing more than a nail gun. Learn more at TAMKO.com.
Cobra Hip Vent
®
CLICK HERE TO READ MORE
Cobra® Hip Vent
GAF
The GAF Cobra Hip Vent provides effective exhaust ventilation on hip-roof style homes that have little or no ridge area. Its unique Dual Weather Fighter™ Filter helps resist weather, insect, and pine needle infiltration while providing 9 square inches of Net Free Area per linear foot of ventilation. The Cobra Hip Vent is versatile and can be installed on three-tab strip, laminate, and designer asphalt shingle roofs without the need for roofing cement. The low-profile design allows for fast and easy nail gun installation.
TruRidge and HighPoint Ventilation Systems
CLICK HERE TO READ MORE
TruRidge and HighPoint Ventilation Systems
Atlas Roofing
Atlas Roofing Corporation recently launched its TruRidge® and HighPoint® roof intake and exhaust ventilation systems, completing the company’s offerings in a full line of roofing products. Atlas TruRidge® ventilation system is comprised of standard ridge vent products with time-tested design and proven performance while Atlas Roofing’s HighPoint® products provide premium low-profile ventilation options. All products are rigid and part of a static (no moving parts) ventilation system that provides the finishing touch to a superior roofing system installation. Atlas ventilation products are eligible components of the Atlas Signature Select® Roofing system and are manufactured with a proprietary polymer that is formulated to withstand the rigors of severe weather conditions. Learn more at Atlasroofing.com/roof-ventilation.